How to Remove Wax From Laminate Flooring [Answered!!]
Laminate flooring is constructed with a super-hard wear layer that eliminates the need for waxing.
Because the pattern is frequently not much more than a thin, paper-like covering that bears a photographic picture of wood, stone, tile, or any other flooring material, the finish must be tough in order to protect it from wear and tear.
It is possible for this hard surface to become dangerously slippery when wax is applied; in addition, when the wax eventually collects dirt, the finish becomes dull.
The procedure of removing wax from laminate floors is time-consuming and labor-intensive.
Additionally, due to a large number of different types of laminate available, it is critical that you test each approach before proceeding with it.
However, even though these cleaning procedures are safe for most varieties of laminate, the only way to be certain they will not damage yours is to test them out first in a concealed or inconspicuous place.
Wax Removal Equipment for Laminate Floors
The laminate flooring reflects natural wood.
They are not only beautiful, but they are also long-lasting.
Anyone would be drawn to the surface layer’s gleaming radiance.
Nothing beats laminate flooring in terms of aesthetic appeal.
You will need the following tools and equipment to remove wax from laminate flooring.
- Microfiber mop / Vacuum cleaner
- a bucket or an ice bag
- a plastic scraper, a butter knife, and a teaspoon
- Iron/Hairdryer
- a clean white cloth / a sponge / a sheet / a cotton towel
- Vinegar, Lemon Juice, Baking Soda, and Warm Water
It is not necessary for anyone to clear off the wax from the laminate floor.
Continue reading to learn about the procedure.
What Is The Most Efficient Way To Remove Wax From Laminate Flooring?
It is possible to erase the stain from your floor quite quickly if you follow the required precautions.
The following are the fundamental procedures to removing wax from your laminate floor:
1. Prepare the floor by vacuuming it beforehand, before you get started
To clean laminate floors properly, you should get a high-quality vacuum with a soft floor cleaning attachment that does not have a spinning rotor.
According to the Home Flooring Pros’ best laminate floor cleaner evaluations, the Dyson DC65 Multi Floor upright vacuum is one of the best vacuums for laminate floors, followed by the Dyson DC65 Animal, which is powered by a rechargeable battery.
Use the vacuum’s highest suction setting to remove as much debris as possible from the joints between planks, which will make the work of removing the wax much easier.
Make sure to vacuum thoroughly under rugs and furniture, since this is where dirt likes to collect and is most likely to become embedded in the carpet.
2. Scrape What You Can Out of It
Using a plastic scraper, remove as much of the wax buildup as you can from the surface now that all of the surface debris has been removed.
Make sure to use plastic scrapers rather than metal scrapers.
In this case, an inexpensive plastic drywall blade (which costs about a dollar or two at any hardware shop) works well.
It is preferable to scrape along the length of the boards rather than across them in order to prevent leaving streaks and packing wax into the joint spaces.
It’s a good idea to soften the wax before scraping it off with a hair drier set on medium to high heat before beginning.
It is not recommended to try to soften the wax with hot water because the water can soak into the joints and cause the planks to bulge.
A steam mop should also be avoided; cleaning laminate floors with a steam mop is usually always a terrible choice for the same reason.
3. Cleaning Power Microfiber Mop
You will be able to clean more successfully if you use a microfiber mop and cleaning power.
It is critical to fully wet the microfiber mop before using it.
You should also carefully read the directions to ensure that they will not cause any damage to your laminate flooring.
Alternatively, you can use a spray bottle to apply the cleaning solution to the floor if you have one.
Use only a small amount of industrial cleaner because too much will leave stains and dull the floor.
4. Soften the Wax by Rubbing It In
When you heat the wax, it becomes more easily removed from your laminate floor, making the entire process of removing the wax deposit from your laminate floor much simpler.
Steam mops, on the other hand, are not a good alternative for surfaces in this category because manufacturers typically do not approve of their use on floors that have not been properly sealed.
Moisture can enter between the planks of laminate flooring when these products are used, resulting in damage to the flooring.
Hairdryers are the most effective alternative, and you should set the temperature of the appliance you wish to use to medium before using it to heat the wax.
5. Remove the Wax with a Soft Cloth.
It is necessary to combine your cleaning solution once you have scraped off as much wax as you can from the surface.
The following components will be included in this process:
- 1 cup white vinegar (optional)
- 1-gallon of boiling water
Simply combine the vinegar and hot water in a bucket and you will have a ready-to-use solution.
To remove the wax, you’ll need to put a clean cloth into the vinegar solution, wring it out, then use it to wipe it away in one direction only while moving the wet cloth.
In addition, you will need to rinse the cloth in the solution and repeat the process.
Alternatively, you can pour the solution into a spray bottle and squirt little amounts of it onto the areas that require cleaning.
If you prefer to work from a standing posture rather than needing to kneel, you can also wrap the cloth around a microfiber mop head to make the job easier.
6. Buff the floor with a soft cloth.
It is necessary to allow for a minimum of 30 minutes of drying time once you have finished covering the entire surface with the adhesive tape.
Any spots should be polished with a microfiber cloth once they have been cleaned, as this will guarantee that the entire floor has a uniform gleam at the end of the procedure.
Clean Your Laminate Floors With This Easy-to-Make Recipe
Fortunately, you can produce laminate floor cleaning right in your own home right now.
There’s no reason to spend additional funds on this.
1.Never underestimate the effectiveness of warm water mixed with vinegar.
When it comes to removing wax from laminate floors, the vinegar mixture is really effective.
Fill a bucket halfway with warm water and 2 cups of vinegar and set it aside.
Fill the bucket halfway with warm water and pour in the vinegar solution.
After soaking the sponge in the vinegar solution, sweep the floor with it to remove any remaining vinegar residue.
2.Make use of Mineral Sprite.
The removal of wax from a laminate floor can be accomplished with mineral spirits or paint thinner, provided that you have adequate air.
Wearing gloves and eye protection should be worn before applying any of these products.
Natural Methods for Removing Wax
I believe the process, suggestions, and tricks outlined above will be of use to you.
This method, however, is also available in this post if you like to remove wax from your laminate floor in a more natural manner while also saving money.
How to Make a Homemade Laminate Floor Cleaner
Using natural ingredients to remove the wax is considerably more enjoyable and thrilling than using chemical solvents.
Please read this specific suggestion to ensure that wax is removed as effectively as possible.
Treatment with Lemon Juice
Lemon juice is a good wax remover for laminate floors because of its acidity.
You can use lemons to clean the wax if you so desire.
If you infuse lemon essential oil into a laminate floor, it will look very stunning.
Lemons are quite efficient in removing the sticky residue left behind by wax.
Lemon has a fresh aroma that can also be used as a deodorant.
It will get rid of the noxious smell of wax that is emanating from the floor.
Expert Advice on How to Remove Wax From Laminate Floors
This article will provide you with five tried and true professional recommendations if you are attempting to remove wax from a laminate floor for the first time and don’t know how to get wax off laminate floor.
1. Make use of an ice bag
Place an ice bag on top of the wax to keep it from melting.
When the wax hardens, it becomes more comfortable to scrape with a scraper.
However, be certain that the bag is completely sealed on all sides.
Alternatively, water can be spilled all over the floor, causing the moisture to swell the surface underneath it.
2.Scrap in a single direction only
Don’t leave a mess on the floor by scraping it.
Scrape it in a single direction from top to bottom.
Otherwise, the wax has the potential to migrate to other areas of the floor.
Use extreme caution during scrapping.
In this scenario, a plastic scraper or a butter knife will suffice.
3.Therapeutic Heat
Once you have scraped away the largest quantity of wax possible, heat the area with a hairdryer or an iron to make it more comfortable.
To begin, place a clean and damp cloth over the wax and then heat it until it is liquid.
The heat will cause the wax to suck.
You may warm the cloth for at least 30 seconds, and once the fabric is dry, dampen it once again and reheat it until the wax is no longer visible on the cloth.
Make certain that you are using a fresh cloth.
Old cloth may be able to transfer heat directly to the floor, causing damage to the surface of your floor.
Make every effort to keep the temperature at the desired level.
4.Make an effort to always use a white cloth
When mopping, it is preferable to use a white cloth.
When the colorful cloth gets wet, it may emit color and cause the lovely laminate floor to be ruined.
5.Baking Soda (Sodium Bicarbonate)
If the scent of wax is still there on your floor, simply sprinkle one teaspoon of baking soda on the surface.
Then you’ll have to wait a few hours.
In addition to acting as a deodorant, baking soda will remove the wax-smell from the floor and carpet.
Our Final Thoughts
Your home will appear more attractive as a result of the laminate flooring.
It is a pleasure to take in the unusual patterns on the floor.
Wax stains on a beautiful floor, on the other hand, can damage it in a matter of seconds.
In order to properly remove wax from laminate flooring, it is necessary to know how. Moreover, as I can attest, the procedure itself is simple and painless.
If you want to remove wax from laminate flooring at home, you already have the chemicals and instruments you need.
You have everything you need in your pocket, including a vacuum cleaner, plastic scrapers, a hairdryer, and baking soda.
As a result, you will not have to spend a single thing on wax removal.
Warm water, vinegar, and lemon juice are all that’s required to prepare a DIY laminate floor cleaning from scratch.
As you can see, the majority of them are made of natural materials.
We hope that now that you know how to remove wax from laminate floors, you will be able to do it without difficulty.
Frequently Ask Questions
What is the best way to remove Mop and Glo from laminate flooring?
To clean linoleum floors, combine two cups of ammonia in a gallon of warm water, then mop or wipe the solution across the floor or apply it with a soft cloth.
Then, after about five minutes, use a nylon scrub pad or a scrub sponge to thoroughly clean the floor.
After that, mop the floor again with clean water to remove any remaining dirt.
Is it possible to wax laminate flooring?
Never polish or wax laminate flooring since they are designed to remain shiny even when not being polished or waxed.
When you apply wax or polish to laminates, you are masking their shiny surface and making them drab.
Instead, continue to use laminate-specific floor cleaners to keep your floors clean.
Is it true that vinegar damages laminate floors?
Yes, vinegar is typically considered to be safe for use on the majority of laminate floors.
The use of diluted vinegar on floors is milder than the use of chemicals, which can damage their surface.
In a spray bottle, combine one cup of white vinegar or cleaning vinegar with warm water.